Staff directory

Search for a surname in the box below and then click "Search" to search for Staff. 

If you want to get in touch but you don’t know who to contact, fill in our enquiry form and one of our advisers will get back to you as soon as possible.

Date


Download Available

76 results

The Mechanical and Resonance Assessment of Large Clear Samples of UK-Grown Beech Wood

Journal Article
Ridley-Ellis, D. (2019)
The Mechanical and Resonance Assessment of Large Clear Samples of UK-Grown Beech Wood. Pro Ligno, 15(4), 32-39
The paper presents the results of non-destructive longitudinal resonance (impulse excitation technique), and mechanical flexural testing, of a batch of European beech wood (Fa...

Post-Disaster Post-Conflict Emergency Shelters: A Holistic Approach

Presentation / Conference
D'Amico, B., Pomponi, L., Montaruli, M., Alshawawreh, L., Snaddon, S., Moghayedi, A., …Pomponi, F. (2019, September)
Post-Disaster Post-Conflict Emergency Shelters: A Holistic Approach. Poster presented at RISE Awards 2019
The constrained environment dominating Post-disaster Post-sheltering design solutions often results in a lack of consideration of sustainability and social dimensions. Neglect...

Timber grading potential of Douglas fir in the Republic of Ireland and the UK

Journal Article
Gil-Moreno, D., Ridley-Ellis, D., & Harte, A. (2019)
Timber grading potential of Douglas fir in the Republic of Ireland and the UK. International Wood Products Journal, 10(2), 64-69. https://doi.org/10.1080/20426445.2019.1617984
Results of the recently approved machine control grading settings for Douglas fir in the Republic of Ireland and the UK have shown that the species can be graded to C18, and h...

Who Is (Likely) Peer-Reviewing Your Papers? A Partial Insight into the World’s Top Reviewers

Journal Article
Pomponi, F., D'Amico, B., & Rye, T. (2019)
Who Is (Likely) Peer-Reviewing Your Papers? A Partial Insight into the World’s Top Reviewers. Publications, 7(1), 15. https://doi.org/10.3390/publications7010015
Scientific publishing is experiencing unprecedented growth in terms of outputs across all fields. Inevitably this creates pressure throughout the system on a number of entitie...

Lesser-used UK-grown timber

Book Chapter
Ridley-Ellis, D. (2019)
Lesser-used UK-grown timber. In TRADA Timber Industry Yearbook 2019, 200-205
Daniel Ridley-Ellis looks at the grading properties of different species in comparison with the highly commercial Sitka spruce.

Influence of parameters affecting the racking strength of partially anchored timber framed walls

Conference Proceeding
Zhang, B., Dohnju, R., Kermani, A., Porteous, J., & D'Amico, B. (2018)
Influence of parameters affecting the racking strength of partially anchored timber framed walls. In WCTE 2018
A test-based assessment of the racking performance of partially anchored timber framed walls is described in this paper. The tested wall specimens were constructed and tested ...

Grading of British Timber

Journal Article
Ridley-Ellis, D. (2018)
Grading of British Timber. The Full Circle: The Journal of the Association of Scottish Hardwood Sawmillers, 34-36
A summary of grading of home grown timber for the magazine of the Association of Scottish Hardwood Sawmillers (ASHS).

Some thresholds for grading British grown spruce to optimised strength classes using longitudinal resonance

Conference Proceeding
Ridley-Ellis, D., Adams, S., & Lehneke, S. (2018)
Some thresholds for grading British grown spruce to optimised strength classes using longitudinal resonance
The main commercial species in the UK and Ireland is Sitka spruce (Picea sitchensis), which is graded in combination with a small amount of Norway spruce (P. abies). It is typ...

Determination of shear modulus of wood joists from torsion tests and relationship with modulus of elasticity

Conference Proceeding
Khokhar, A., & Zhang, J. (2018)
Determination of shear modulus of wood joists from torsion tests and relationship with modulus of elasticity
This paper presents the work that was undertaken to use torsion tests to evaluate the shear modulus of wood joists. The relationship of the shear modulus with modulus of elast...

Automatic code compliance with multi-dimensional data fitting in a BIM context

Journal Article
Patlakas, P., Livingstone, A., Hairstans, R., & Neighbour, G. (2018)
Automatic code compliance with multi-dimensional data fitting in a BIM context. Advanced engineering informatics, 38, (216-231). ISSN 1474-0346
BIM-based tools can contribute to addressing some of the challenges faced by structural engineering practitioners. A BIM-based framework for the development of components that...
24 results

Digitisation of Home Grown Timber Products

2020 - 2021
The aim of this project is to determine the potential for the symbiosis of renewable resource (forestry, woody bio-mass and naturally replenishable) and the high value manufacture of a resilient and s...
Funder: Forestry Commission Scotland | Value: £30,000

CSIC Mass Timber Commercialisaton

2019 - 2021
Edinburgh Napier University to investigate and undertake the following tasks: • Collate, analyse and summarise their research base on mass timber and its viability as a construction technique for the ...
Funder: Construction Scotland Innovation Centre | Value: £69,786

SIRT 2019-20 (WP1&2)

2019 - 2020
Our research activities are focused on understanding the physical and mechanical properties of wood and how these affect its performance in different applications. Our main aim is to better understand...
Funder: Forestry Commission Scotland | Value: £96,000

InFutUReWood

2019 - 2022
Timber and construction research
Funder: European Commission | Value: £122,942

SIRT 2018-19 (WP1&2)

2018 - 2019
Our research activities are focused on understanding the physical and mechanical properties of wood and how these affect its performance in different applications. Our main aim is to better understand...
Funder: Forestry Commission Scotland | Value: £99,000

Getting the numbers right and getting the right numbers: quantifying the embodied carbon of building structures

2018 - 2019
Building-related carbon emissions in the UK total over 200MtCO2e, which is more than 40% of the national figure. The correct measurement of the embodied carbon of structural materials would enable a r...
Funder: Engineering and Physical Sciences Research Council | Value: £100,852

SIRT WP2 2017-18

2017 - 2018
Timber grading standards support ensuring standards are good for the domestic timber industries, and supporting industry in using them
Funder: Forestry Commission Scotland | Value: £42,500

SIRT WP1 2017-18

2017 - 2018
Applied research and knowledge transfer addressing industry needs – as set out by the SIRT management board. This includes providing information and advice to industry sponsors
Funder: Forestry Commission Scotland | Value: £107,500

YOKER 2 - CCG (Scotland) Ltd

2017 - 2018
Buildings , energy and acoustics project through CSIC
Funder: Construction Scotland Innovation Centre | Value: £46,926

State of the art review of solar kiln technology

2017 - 2017
Forestry Commission Scotland have asked us to carry out a short review of solar kiln technology and, specifically, a kiln design proposed by a small Scottish sawmill. The report is for the public ben...
Funder: Forestry Commission Scotland | Value: £525

Date


Research Centres Groups

Research Areas

People