Search for a surname in the box below and then click "Search" to search for Staff.
Stankiewicz, A., Kefallinou, Z., Mordarski, G., Jagoda, Z., & Spencer, B. (2018, July). Surface functionalisation by the introduction of self-healing properties into electroless Ni -P. Poster presented at Electrochemical Methods in Corrosion Research 2018
See file for abstract.
Stankiewicz, A., Kefallinou, Z., Mordarski, G., Jagoda, Z., & Spencer, B. (2019). Surface functionalisation by the introduction of self-healing properties into electroless Ni-P coatings. Electrochimica Acta, 297, 427-434. doi:10.1016/j.electacta.2018.12.026
Ni-P∖alginate microgels coatings, as potential metallic protective coatings with self-healing properties, were deposited by the electroless method. The alginate microgels cont...
Binetti, L., Stankiewicz, A., & Alwis, L. S. M. (2018). Graphene-Oxide and Hydrogel Coated FBG-Based pH Sensor for Biomedical Applications. Proceedings, 2(13), 789. https://doi.org/10.3390/proceedings2130789
A hydrogel coated fibre grating-based pH sensor for biomedical applications has been realised, where Graphene Oxide (GO) had been used to enhance the bonding between the coati...
Scottish Funding Council
This project is to assist in the research of cleaning coffee cups to a standard acceptable for public use. The research will be used in the development of a product that can be installed in office sp...
Zero Waste Scotland
Novel extraction techniques for cellulose form seaweed
Royal Academy of Engineering
Africa is the continent with the highest number of displaced people due to wars, humanitarian crises, resource scarcity, and extreme climate events. Emergency sheltering always sets out with the best ...
Research Fellow, Energy Consultant & Lecturer
Senior Research Fellow
Marinelli, A., & Stewart, M. (2018). Investigating the fracture behavior of Portland limestone: an experimental study. Procedia Structural Integrity, 10, 104-111
An experimental investigation of the mechanical and fracture characteristics of the ‘Grove Whitbed’ Portland limestone is undertaken with the aim to enhance understanding of t...
Onyianta, A. J., Dorris, M., & Williams, R. (2017). Aqueous morpholine pre-treatment in cellulose nanofibril (CNF) production: comparison with carboxymethylation and TEMPO oxidisation pre-treatment methods. Cellulose, https://doi.org/10.1007/s10570-017-1631-0
In this study, pulped cellulose fibres were pre-treated with aqueous morpholine prior to mechanical disruption in the production of cellulose nanofibrils (CNF). The properties...
Szczygieł, B. & Turkiewicz, A. (2008). The effect of suspension bath composition on the composition, topography and structure of electrolessly deposited composite four-component Ni–W–P–ZrO2 coatings. Applied Surface Science. 254(22), 7410-7416. doi:10.1016/j.apsusc.2008.05.342. ISSN 0169-4332
Composite four-component Ni–W–P–ZrO2 coatings were electrolessly deposited from a bath with different concentrations of aminoacetic acid (glycine—the complexing agent), sodium...
Bernal-Sanchez, J., Mcdougall, J., Barreto, D., Marinelli, A., Dimitriadi, V., Anbazhagan, P., & Miranda, M. (2019). Experimental assessment of stiffness and damping in rubber-sand mixtures at various strain levels. In Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions, (1403-1410)
The dynamic properties of shredded rubber-soil mixtures (ShRm), comprising a sub-rounded quartz sand combined with small rubber shreds at 0, 10, 20, 30% by mass, were investig...
Stankiewicz, A., Winiarski, J., Zielinska, K., & Barker, M. (2017). Electroless Ni-P\alginate microgels coatings with self-healing properties. In Proceedings of EuroCorr 2017
Self-healing coatings, offering corrosion protection on an alloy steel substrate, were fabricated by electroless co-deposition of a Ni-P matrix together wit...
Ridley-Ellis, D. (2014). Stand-up comedy for researchers. In I. Daly, & A. Brophy Haney (Eds.), 53 interesting ways to communicate your research, 57-58. The Professional and Higher Partnership Ltd
Effective researchers need both to conduct high-quality research and to communicate it - to subject specialists, researchers in other fields, research participants, business, ...
Fausti, P., García, T. C., Ingelaere, B., Machimbarrena, M., Monteiro, C. R. A., Santoni, A., …Smith, S. (2014). Design and Acoustic Performance of Building Constructions for Multi-Storey Housing: Compendium. In B. Rasmussen, & M. Machimbarrena (Eds.), COST Action TU0901 – Building acoustics throughout Europe. Volume 1: Towards a common framework in building acoustics throughout Europe, 213-244. COST European Cooperation in Science and Technology
This chapter provides an overview of the range of construction types
found across Europe to meet various sound insulation requirements for separating (party) walls and floors....
Khokhar, A., Chui, Y., & Smith, I. (2012). Influence of stiffness of between-joists bracing on vibrational serviceability of wood floors. In P. Quenneville (Ed.), Proceedings of World Conference on Timber Engineering (WCTE 2012), 362-369
Floors with repetitive parallel wood joists overlain by wood panel sheathing behave as orthotropic two-way structures since their along-joist stiffness is much higher than acr...
Khokhar, A., & Zhang, J. (2012). The Use of Torsion Test Method to Evaluate the Shear Properties of Timber Joists. In P. Quenneville (Ed.), Proceedings of the World Conference on Timber Engineering (WCTE 2012)
This paper presents details of the experimental method and test results from a series of torsion tests undertaken to evaluate the shear modulus and shear strength of solid tim...
Khokhar, A. M., Zhang, H., & Ridley-Ellis, D. (2009). The shear strength and failure modes of timber joists obtained from the torsion test method. In A. Ceccotti (Ed.), 11th World Conference on Timber Engineering 2010 (WTCTE 2010), 3509-3516
This paper presents details of the experimental method and test results from a series of torsion tests undertaken to evaluate the shear strength of timber joists. The failure...
Reichert, T., & Ridley-Ellis, D. (2009). Computational issues regarding lattice models for wood. In A. Ceccotti (Ed.), 11th World Conference on Timber Engineering 2010 (WCTE 2010), 2127-2132
This paper describes means to overcome some of the computational issues related to lattice models. The first is the use of a solution technique, different from a Newton-Raphso...
Ridley-Ellis, D. J., Owen, J. S., & Davies, G. (2001). Flexural behaviour of Rectangular Hollow Sections with circular side wall openings. In R. Puthli, & S. Herion (Eds.), Tubular Structures IX : Proceedings of the Ninth International Symposium and Euroconference, Dusseldorf, Germany, 3-5 April 2001:, 339-348
The influence of circular web openings on the flexura behaviour of Rectangular Hollow Sections is introduced. The results of full-scale laboratory tests in three and four-poi...
The population in Africa is growing rapidly, and thus the urbanization is accelerated. The need for detailed information on the performance of materials is a crucial part of the decision-making proces...
Developing the Nanoguard coating for use in construction and the built environment
Fast Fix have a patented design for a construction block that offers highly flexible construction potential in disaster and war zones. Using recyclable plastics would make the product lighter, cheap t...
Design an mechanism to initiate a blister pack controlled release
To look at the feasibility of redesigning an electronic device with specific properties to meet offshore performance standard. This will require materials analysis and design, electronics analysis and...
The customer has experience in the locksmith sector and has identified an opportunity for developing a system that will automatically control the closure of windows to prevent theft and break in. An i...
To further develop, optimise and upscale a current lab based technology for innovative surface coatings techniques into a
full scale production process.
Innovate KTP no. 009703
The purpose of this follow-on project is to conduct a suite of research and development testing on an innovative insulation product, focused around a live project. The insulation product, Retrofoam, u...
The purpose of this follow-on project is to conduct in-situ post-occupancy energy analyses on refurbished four-in-a block dwellings that have been upgraded to high sustainability standards using: inno...
The feasibility study will provide building energy performance specifications and recommendations on suitable renewable technology designs for a portable accommodation unit in rural Perthshire. It wi...
To develop high performance floor and wall insulation products based on novel nanotechnology Aerogel materials that enhance the thermal performance of hard to treat buildings.
This research was funded by the EU Northern Periphery Programme as part of a trans-national project titled: E...
The main aim of the project seeks to enhance the resistance of the soil foundation against seismic events with the introducti...
"This study will look at addressing the issues concerning environmentally conscious homes and reviewing how efficiently they compare asp...
Scientists from Edinburgh Napier University (Dr. Luigi La Spada) in collaboration with Queen Mary University of London and UK Industries (Qinetiq Group Ltd) have successfully developed a new design me...
11 March 2019
Stirling Court Hotel – University of Stirling
19 September 2016