Search for a surname in the box below and then click "Search" to search for Staff.
Saleh, W. (2017, November). Electrical cars: an option for the Gulf states?. Presented at International Energy and Environment Summit - 2017, Dubai
Stinson, J. W. Smart energy monitoring technology to reduce domestic electricity and gas consumption through behaviour change. (Thesis)
If the UK is to address its energy reduction targets, it is vital to understand energy use behaviours and to devise technology that positively encourages domestic occupants to...
Russell, A. D. Metal Injection Moulding. (Thesis). Edinburgh Napier University. Retrieved from http://researchrepository.napier.ac.uk/id/eprint/9827
Gas turbine compressor components manufactured from nickel base alloys have
traditionally been precision die forged in sequential thermo-mechanical processing
operations in or...
McCorquodale, C. Development of a Fatigue Analysis Tool to Predict Cable Flex Life. (Thesis). Edinburgh Napier University. Retrieved from http://researchrepository.napier.ac.uk/id/eprint/7570
Fatigue failure by flexing is a common failure mode for cables in a high flex environment. As a result, the specialist cable supplier, Axon’ Cable LTD found a need for a flex ...
Rose, W. The Application of Human Factors through the Assessment and Improvement of Behavioural Safety to Improve Safety Performance in Small to Medium Sized Enterprises. (Thesis). Edinburgh Napier University. Retrieved from http://researchrepository.napier.ac.uk/id/eprint/5022
User-friendly systems of human factors (HF) analysis are not presently available to the managers of small to medium sized enterprises (SMEs). It is therefore difficult for s...
Asif, M. Life cycle assessment of aluminium-clad timber windows. (Thesis). Napier University. Retrieved from http://researchrepository.napier.ac.uk/id/eprint/2505
Over the last century a temperature rise of 0.6 C m global climate and the affiliated greenhouse effects have inflicted enormous impacts in the form of natural catastrophes, e...
Mitchell, C. A. A study of the powder processing, tribological performance and metallurgy of Aluminium-based, discontinuously reinforced metal matrix composites. (Thesis). Edinburgh Napier University. Retrieved from http://researchrepository.napier.ac.uk/id/eprint/3807
The principal objectives of the research reported in this thesis are: to determine the
effect that sinter time has on the metallurgical behaviour of alumina-reinforced
Heritage, I. Direct electric curing of mortar and concrete. (Thesis). Edinburgh Napier University. Retrieved from http://researchrepository.napier.ac.uk/id/eprint/6571
Direct electric curing is the method by which the hydration reactions within concrete are
thermally accelerated by passing an alternating electric current through the sample. ...
Starrs, G. Measurement of the electrical properties of concrete at radio frequencies. (Thesis). Edinburgh Napier University. Retrieved from http://researchrepository.napier.ac.uk/id/eprint/6573
This thesis is a presentation of research into the elecrical properties of concrete at
radio frequencies (1-1000 MHz). The physical properties of concrete are examined
Taylor, M. (2019, April). Wearable technology and workplace epidemiology: a practical example from the field of hand-arm vibration. Poster presented at The 12th UK/Ireland 1-day Meeting on Occupational and Environmental Epidemiology
This work investigates the application of wearable technology for the collection of exposure data relevant to the study of Hand Arm Vibration Syndrome. Wearable technology des...
Barreto Gonzalez, D. (2018, December). Entropy coordinates - Useful descriptor for particle siz edistributions and their link to various geotechnical properties
No abstract available.
Bosoc, L., Barreto Gonzalez, D., & Rouainia, M. (2018, June). DEM Modelling of Tunnelling-Induced Settlements – Void Ratio and Rate of Mass Removal Effects. Paper presented at 6th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems)
Kerrouche, A. (2017, May). Recent developments in integrated platforms. Presented at International Symposium on Health-Related Water Microbiology
This session will review and discuss the increase role of automated rapid and molecular methods for pathogen detection in drinking water and attempt to reach a consensus on th...
Kinkiri, S., Melis, W. J., & Keates, S. (2017, February). Creating patterns for machine learning using multiple alignment. Poster presented at First HBP (Human Brain Project) Student Conference: Transdisciplinary Research Linking Neuroscience, Brain Medicine and Computer Science
Balisson, D., Melis, W. J., & Keates, S. (2017, February). Native architecture for artificial intelligence. Paper presented at 1st HBP Student Conference: Transdisciplinary Reserach Linking Neuroscience, Brain Medicine and Computer Science
The brain is a complex organ and even to this date, very little is known about how it works. Through the years, replicating the intelligence of the brain has puzz...