Learning Materials Developer & Interactive Lecturer
Innes, M., & Winton, E. (2017). Lighting for Cities Inhabited by People, Not Cars: Community Co-Design and Creative Lighting. In Convention Proceedings - PLDC 6th Global Lighting Design Conference
Electric street lighting has developed wholly in the age of the motor car. Therefore, normal models of urban lighting are based firmly on designing for vehicle traffic. Standa...
Innes, M. (2017). True Colours: explorations in art, design and research. In Color and Imaging Conference, 309-312
Do you see colour the same way that I see colour? As my initial training was as an artist, it is possible that I look at colour very differently from someone with a scientific...
Vettese, S. (2017). 3D printable recycled textiles : material innovation and a resurrection of the forgotten ‘shoddy’ industry. In Loughborough University Textile Design Research Group INTERSECTIONS Conference 2017ISBN not known
This paper will disseminate an interdisciplinary project, undertaken at Edinburgh Napier University between the Design and Advanced Materials. Several 3D printable materials a...
Scottish Funding Council
This project takes a new approach to teaching Mindful-breathing techniques to children aged 4-9.
Diagnosis of anxiety, stress, depression and ADHD in children has seen a significant increase over the...
Carnegie Trust for the Universities of Scotland
The proposed research project seeks to examine the ways colony-based photographers represented and celebrated the success of the colonial-based enterprises in Southeast Asian at the turn of the 20th c...
Edinburgh World Heritage
12 Closes is a 4 year project partnership with Edinburgh World Heritage to re-invigorate and redesign a series of the Royal Mile's pedestrian closes. The projects will be developed through a process o...
15 September 2016
15 September 2016
Public Talk at Stills Gallery, Edinburgh, about the Franki Raffles Archive Research project www.frankirafflesarchive.org
19 October 2016
19 October 2016
Paper presented to a postgraduate research seminar at the Centre for Media and Culture, University of Stirling
Programme Leader BDes(Hons) Product Design
Innes, M. (2017). The edges of lighting design Research and practice on the fringes. In New Perspectives on the Future of Healthy Light and Lighting in Daily Life, 16-21. ISBN 978-3-940677-61-7
Research and practice on the fringes
If architectural lighting design is contained within a defined circle, then the edges are, at the very least, quite blurred. All kinds of ...
O 'Dowd, A. (2017). SKiN Designing pseudo-physiology into personal technology devices to create enhanced interactions through visceral signifiers and behaviours
The majority of technology is now personal. Humans, in turn, are expected to and have personal relationships with their devices. The issue is that humans are biological beings...
Vettese, S., Thompson, P. & Allan, D. (2017). A study of the multi generational relationship with making through mediated designing in collaborative, digital environments: implications for learning and open access fabrication. In Cumulus Hong Kong 2016, Cumulus Working Papers, Open Design for E-very-thing, 23 - 30. ISBN 9789526000800
In this paper, the researchers will investigate different ways in which school age, 'generation net' children learn, through non-linear, mediated, collaborative ‘making’ envir...
Vones, K. (2017). Crafted Evolution - The creation of the HyperHive Series. In Conference Proceedingsdoi:10.6084/m9.figshare.4746934. ISBN N/A
The following paper describes the conception and creation of the HyperHive Series of interactive pendants. This practice-led research analyses how the recent emergence of term...
Buwert, P. (2017). Shepard Fairey’s inauguration posters may define political art in Trump era
The American street artist Shepard Fairey created a poster for Barack Obama’s presidential election campaign. It was 2008 and the simple red, beige and blue stencilled image o...
Vettese, S. & Anastasiadou, C. (2016). In Situ 3D Printed Souvenirs and their Affect on Visitors Engagement with Built Heritage. In In this place : cumulus association biannual international conference, 98-103. ISBN 978-0-9928878-1-0
In this study, visitors’ perception and engagement with built heritage surroundings was investigated in relation to their interaction with 3d printed souvenirs which reflected...
Quye, A., Han, J. & Innes, M. (2016). Research on the Chemical and Colour Changes of Historically Important Light-Sensitive Dyestuffs during Accelerated Light Ageing with Filtered Visible Light
Lighting is a key factor for the display and preservation of cultural heritage materials. This research pioneers the chemical investigation of colourants aged by visible light...
Buwert, P. (2016). Designers are seizing Wall Street – but can they improve your life?
Designers are seizing Wall Street – but can they improve your life?
Innes, M. (2015). Digital Lighting for the Analogue Museum. In PLDC 2015 ProceedingsISBN 978-3-9811940-3-6
Exhibition lighting in museums and galleries usually strives to render the true nature of the surface of the exhibits. This would normally include using light sources that pro...
Forster, S. & Anastasiadou, C. (2015). Enhancing the Tourist Heritage Experience through In-Situ, Customisable, 3D printed Souvenirs. In Proceedings Heritage Tourism & Hospitality International Conference 2015ISBN 978-90-9029477-3
This research set out to investigate whether technological innovations in design and the personalisation of tourist souvenirs through 3D printing, could offer opportunities to...
Vones, K. (2014). Towards the Posthuman: Materiality and process in the creation of stimulus-responsive jewellery objects. In All Makers Now?ISBN 978-0-9544187-9-3
The idea of creating a jewellery organism that comes alive on the
body has fascinated and inspired my research ever since learning
about the potential inherent in smart materi...
THOMPSON, P. & PENGELLY, J. (2013). Walking in the Garden of Forking Paths – examining notions of 'post-‐physical' printmaking in digital space. 1. In Watson, A., Shemilt, E. & Liam Harrison, P. (Eds.). Impact 8: Borders & Crossings: the artist as explorer, 1-13. ISBN 1 899837 70 1
This paper presents findings from practice-based research, which examines notions of post-physical printmaking space through the digital medium of Augmented Reality.
The Royal Zoological Society would like to work with academics and students at Napier University to scope a new and innovative event that attracts a new audience to Edinburgh Zoo. The aim of the event...
The project will require the customisation of a mobile vehicle to fulfil the physical and social requirements of data collection from the public, considering the practical, emotional and aesthetic req...
Kirkwall is the capital town of the Orkney Islands. It has a population of around 8,500 people, but Orkney has over 140,000 visitors every year. The majority of visitors are in the summer months and J...
The Royal Botanic Garden Edinburgh (RBGE) would like to create a light show at its Edinburgh Garden during the dark winter months of November and December 2014 that will bring the gardens alive in the...
The proposed project is to develop a prototype publication with the working title ‘High Ground – a place of wonder, light & the lost’, a study of the Necropolis in Glasgow. The book will be a graphic ...
Higher Education Academy
The scheme provides the opportunity to experience Scotland’s new education system Curriculum for Excellence (CfE), first hand. Secondary school visits will engage with teachers and pupils and consider...
The Royal Botanic Gardens Edinburgh would like to explore an opportunity to try to attract more visitors to the gardens during the dark winter months. They came up with an idea of setting up possible ...
This follow-on project will continue the relationship between the company and the academic who worked on the original innovation voucher project. New concepts will be created for all the visual elemen...
Method Furniture craft their quality bespoke furniture that is shipped to customers all over the world. To protect the product they hand make basic wooden transportation boxes to keep the products saf...