Research explorer tool

4 results

Electroless Ni-P\alginate microgels coatings with self-healing properties

Conference Proceeding
Stankiewicz, A., Winiarski, J., Zielinska, K., & Barker, M. (2017)
Electroless Ni-P\alginate microgels coatings with self-healing properties. In Proceedings of EuroCorr 2017
Self-healing coatings, offering corrosion protection on an alloy steel substrate, were fabricated by electroless co-deposition of a Ni-P matrix together wit...

Development of self-healing coatings for corrosion protection on metallic structures

Journal Article
Stankiewicz, A., & Barker, M. B. (2016)
Development of self-healing coatings for corrosion protection on metallic structures. Smart Materials and Structures, 25(8), 084013. https://doi.org/10.1088/0964-1726/25/8/084013
Inspired by biological systems, artificial self-healing materials are designed for repairing local damage caused by external factors. The rapidly expanding field of self-heali...

Enhancing the power output of moving coil actuators by incorporating soft polymers.

Journal Article
Cho, M., Barker, M., & Prokofieva, E. (2013)
Enhancing the power output of moving coil actuators by incorporating soft polymers. Sensors and Actuators A: Physical, 193, 161-169. https://doi.org/10.1016/j.sna.2013.01.018
A novel design of an actuator coupled with a low-hardness silicone elastomer called “the gel surround” is presented. It means that the output power of a conventional moving co...

On the Influence of Surfactant Incorporation during Electroless Nickel Plating

Journal Article
Nwosu, N., Davidson, A., Hindle, C., & Barker, M. (2012)
On the Influence of Surfactant Incorporation during Electroless Nickel Plating. Industrial & engineering chemistry research, 51(16), 5635-5644. https://doi.org/10.1021/ie202625n
The effects of surfactants on the dynamics and characteristics of plain and composite electroless nickel plating (ENP) are highlighted and discussed herein. An outline of the ...

Date


18 results

Developing whole-life cost models for retrofit options in office buildings

2012 - 2016
Olubukola Tokede | Director of Studies: Prof Naren Gupta

The manufacture of gas turbine compressor components by Metal Injection Moulding

2011 - 2015
Andrew Russell | Director of Studies: Mike Barker | Second Supervisor: Alan Davidson

The effects of polymers on the fracture characteristics of high performance concrete

2011 - 2016
Mohmed Yahya | Director of Studies: Mike Barker | Second Supervisor: Ben Zhang

Processing, characterisation and durability of tubular solid oxide fuel cell cathodes

2010 - 2015
Dong Wang | Director of Studies: Alan Davidson | Second Supervisor: Mike Barker

Hand gesture discrimination with passive infrared sensor arrays

2010 - 2017
Piotr Wojtczuk | Director of Studies: Dr David Binnie | Second Supervisor: Alistair Armitage

Fabrication and characterisation of planar and tubular solid oxide fuel cell anodes

2010 - 2013
Yanzhao Zhang | Director of Studies: Alan Davidson | Second Supervisor: Mike Barker

Optimisation of electroless co-deposited solid oxide fuel cell electrodes

2009 - 2013
Okwuchukwu Nwosu | Director of Studies: Alan Davidson | Second Supervisor: Mike Barker

Effect of polymeric properties on the operation of gel-type audio transducers

2009 - 2013
Min Cho | Director of Studies: Mike Barker | Second Supervisor: Dr Elena Prokofieva

The development and analysis of conductive nonwoven carbon fibre veils for electromagnetic shielding applications

2008 - 2010
Electromagnetic interference (EMI) is a growing problem in the modern world and as the ...
Andrew Austin | Director of Studies: Mike Barker | Second Supervisor: John Sharp

Conductively filled poly(methyl methacrylate) composites: manufacture, and testing processes for EMI shielding effectiveness

2006 - 2012
Jonathan Smuga | Director of Studies: Mike Barker | Second Supervisor: Alan Davidson

Date


Date