22 results

Customisable 3D printed model of Robin Hood Gardens

Physical Artefact
Vettese, S., & Vones, K. Customisable 3D printed model of Robin Hood Gardens. [Physical Artefact]. Edinburgh Napier University

)
Vettese, S., & Vones, K. Customisable 3D printed model of Robin Hood Gardens. [Physical Artefact]. Edinburgh Napier University
This research proposed to utilise the processes and experiences of designing and making 3D printed 'souvenirs of place', with regards to Modern 'overlooked' heritage. The publ...

3D-printing ‘Ocean plastic’–Fostering childrens’ engagement with sustainability

Journal Article
Vones, K., Allan, D., Lambert, I., & Vettese, S. (2018)
3D-printing ‘Ocean plastic’–Fostering childrens’ engagement with sustainability. Materials Today Communications, 16, 56-59. https://doi.org/10.1016/j.mtcomm.2018.04.001
Ocean plastic pollution has been identified as one of the biggest environmental threats of our time. As large islands of plastic waste such as the Pacific Gyre amass through t...

3D Printable Recycled Textiles: Material Innovation and a Resurrection of the Forgotten “shoddy” Industry

Journal Article
Vettese Forster, S. (2017)
3D Printable Recycled Textiles: Material Innovation and a Resurrection of the Forgotten “shoddy” Industry. Journal of Textile Design Research and Practice, 5(2), 138-156. https://doi.org/10.1080/20511787.2018.1449073
This paper will disseminate an interdisciplinary project, undertaken at Edinburgh Napier University between the Design and Advanced Materials. Several 3D printable materials a...

In Situ 3D Printed Souvenirs and their Affect on Visitors Engagement with Built Heritage

Conference Proceeding
Vettese, S., & Anastasiadou, C. (2016)
In Situ 3D Printed Souvenirs and their Affect on Visitors Engagement with Built Heritage. In In this place : cumulus association biannual international conference (98-103
In this study, visitors’ perception and engagement with built heritage surroundings was investigated in relation to their interaction with 3d printed souvenirs which reflected...

“From souvenirs to 3D printed souvenirs”. Exploring the capabilities of additive manufacturing technologies in (re)-framing tourist souvenirs

Journal Article
Anastasiadou, C., & Vettese, S. (2019)
“From souvenirs to 3D printed souvenirs”. Exploring the capabilities of additive manufacturing technologies in (re)-framing tourist souvenirs. Tourism Management, 71, 428-442. https://doi.org/10.1016/j.tourman.2018.10.032
Souvenirs, whether mass-produced commodities made elsewhere or local artisanal handicrafts, are static objects that lack the capacity to mediate or generate the co-creative, a...

3D printable recycled textiles : material innovation and a resurrection of the forgotten ‘shoddy’ industry

Conference Proceeding
Vettese, S. (2017)
3D printable recycled textiles : material innovation and a resurrection of the forgotten ‘shoddy’ industry. In Loughborough University Textile Design Research Group INTERSECTIONS Conference 2017
This paper will disseminate an interdisciplinary project, undertaken at Edinburgh Napier University between the Design and Advanced Materials. Several 3D printable materials a...

An exploration of the sustainable and aesthetic possibilities of 3D printing onto textiles as an alternative to traditional surface decoration

Conference Proceeding
Burn, K., Vettese, S., & Shackleton, J. (2017)
An exploration of the sustainable and aesthetic possibilities of 3D printing onto textiles as an alternative to traditional surface decoration. In Circular Transitions Proceedings, (141-154
Embellishment, in a fashion and textile context, can be considered an extraneous decorative process that has a significant detrimental impact on the environment. However, aest...

A study of childrens' relationship with making and use of CAD in collaborative, physical and digital environments : implications for learning and open access fabrication

Journal Article
Vettese, S., Allan, D., & Thompson, P. (2018)
A study of childrens' relationship with making and use of CAD in collaborative, physical and digital environments : implications for learning and open access fabrication. Design and Technology Education: An International Journal, 23(3), 10-25
In this paper, the researchers will investigate different ways in which school age, 'generation net' children learn, through non-linear, mediated, collaborative ‘making’ envir...

A study of the multi generational relationship with making through mediated designing in collaborative, digital environments: implications for learning and open access fabrication

Conference Proceeding
Vettese, S., Thompson, P., & Allan, D. (2017)
A study of the multi generational relationship with making through mediated designing in collaborative, digital environments: implications for learning and open access fabrication. In Cumulus Hong Kong 2016, Cumulus Working Papers, Open Design for E-very-thing (23-30
In this paper, the researchers will investigate different ways in which school age, 'generation net' children learn, through non-linear, mediated, collaborative ‘making’ envir...

Livingston New Town: Art, History, People

Exhibition / Performance
Vettese, S., & Devison, N. Livingston New Town: Art, History, People. [3D printed objects]. 29 November 2019 - 22 November 2020. (Unpublished)

)
Vettese, S., & Devison, N. Livingston New Town: Art, History, People. [3D printed objects]. 29 November 2019 - 22 November 2020. (Unpublished
Livingston New Town: Art, History, People Drawing on a wealth of photographs, illustrations and models, as well as historical artefacts from the museums and the archival coll...
10 results

Enhancing the authenticity and sustainability of the visitor heritage experiences through 3D printing technology

2014 - 2015
This project proposes to offer an alternative approach to the contemporary heritage souvenir experience through the utilization of 3D scanning and printing and online, remote interfaces between the mu...
Funder: Arts & Humanities Research Council | Value: £33,250

Towards sustainable textiles – can fungi be used to produce useful textile materials?

2018 - 2018
The textile industry is based largely on the use of cotton, leather and oil derived polymers and these industries are resource intensive and not sustainable. For example, cotton production requires va...
Funder: Edinburgh Innovations Ltd | Value: £7,500

Development of 3D printing techniques, utilising sustainable polymers towards towards bespoke millinery outcomes

2021 - 2021
To design and innovate hat designs for rapid prototyping using biodegradable material options in 3D printing.
Funder: Scottish Funding Council | Value: £5,000

Creating a Voluntary Garment Manufacturing Hub using experimental and recycled materials towards Sleeping Jackets which will be distributed free of charge to Homeless individuals.

2023 - 2024
It is proposed that the academics work with their contacts who are a group of ‘volunteers’ working in connection with the Edinburgh Tool Library’s ‘Volunteers Assembly’, to create a series of prototyp...
Funder: Scottish Funding Council | Value: £5,000

Creating a sustainable, desirable solid and soft product utilising used, previously non ‘upcycle-able’ textiles

2019 - 2020
We’re looking to develop a pet bedding design from re-used bedding material (Sheets, Duvets, Mattresses & Pillows). The idea is to make a product that is highly functional in nature and also well desi...
Funder: Scottish Funding Council | Value: £5,000

New Processes for Tranforming Unexploited Textiles into High Value Products

2016 - 2017
This project proposes utilising high quality Scottish ‘unused’ textiles, including pieces of yarn and fabric that are too small to be used in apparel or upholstery production, in a ‘powdered’ form. Th...
Funder: Heriot Watt University | Value: £43,936

Utilising 3D printable leather composite materials towards repair, reuse and increased longevity of leather products

2019 - 2019
Leather is used in many luxury and utilitarian goods in our daily life. While many leather products, previously thought of as heirlooms, have become more replaceable and throwaway, many still aspire t...
Funder: The Scottish Institute for Remanufacture | Value: £49,882

The Wee Tie Company: Innovation Voucher

2018 - 2018
Development of a working prototype for the "Wee Tie", a new fashion accessory for wearing with open-necked shirts. Our input will be to look at materials and fastening/adjusting mechanisms at the back...
Funder: Scottish Funding Council | Value: £5,000

Measuring the capabilities of new, sustainable materials in digital and traditional craft practices towards repeatability and a widening of their usage.

2022 - 2022
This project offers a novel way of engaging with data about creative practice: getting data on the possibilities and best practices for using particular materials out of the heads of individual creati...
Funder: Arts & Humanities Research Council | Value: £5,000

My Bonnie Coo

2018 - 2018
The aim of this project is to design and prototype a new, flatpack, low carbon home accessory for the Scottish tourist, domestic and export markets, using an eco-friendly alternative to medium density...
Funder: Scottish Funding Council | Value: £4,958