Research explorer tool

5 results

Adaptive PN code acquisition in multi-path spread spectrum communications using FPGA.

Conference Proceeding
Wei, B., Sharif, M., Binnie, D. & Almaini, A. E. A. (2007)
Adaptive PN code acquisition in multi-path spread spectrum communications using FPGA. In Proceedings of the 13th International Symposium on Signals, Circuits and Systems, 573-576. ISBN 978-1424409686
Performance of two pseudonoise (PN) code detectors was tested. Cell averaging (CA) and order Statistics (OS) constant false alarm rates (CFAR) were analysed against mean acqui...

Mobile Multicast Route Optimisation

Conference Proceeding
Romdhani, I., Munoz, J., Bettahar, H., & Bouabdallah, A. (2006)
Mobile Multicast Route Optimisation. In IEEE International Conference on Communications, 2006. ICC '06, 1977-1983. doi:10.1109/icc.2006.255060
The multiparty nature of multicast applications presents new challenges for Mobile IP users. Unfortunately, when a multicast receiver is mobile, it will experience additional ...

PN code acquisition with a CA-CFAR adaptive digital matched filter and its realisation using FPGA.

Conference Proceeding
Wie, B., Sharif, M., Almaini, A. E. A. & Binnie, D. (2006)
PN code acquisition with a CA-CFAR adaptive digital matched filter and its realisation using FPGA. In Proceedings of IEEE 13th International Conference on Systems, Signals & Image Processing, IWSSIP’06
In this paper the performance of a Cell Averaging Constant False Alarm Rate (CA-CFAR) Pseudo-Noise (PN) code adaptive detector is analysed for a single path communication chan...

A minimal jerk prosthesis control system.

Conference Proceeding
Hill, S. S., Binnie, D. & Gow, D. J. (2005)
A minimal jerk prosthesis control system. In Proceedings of the MEC’05 conference, UNB; 2005ISBN 1-55131-100-3

Electromechanical analysis of a prosthetic arm (EMAS).

Conference Proceeding
Binnie, D., Gow, D. J. & Hill, S. S. (2005)
Electromechanical analysis of a prosthetic arm (EMAS). In Proceedings of the MEC’05 conference, UNB; 2005ISBN 1-55131-100-3
A characterisation of a complete arm prosthesis is necessary to develop effective control. This is a description of the use of Lagrange methodology to describe the system and ...