8 results

Cellulose as a Pore Former in Electroless Co-Deposited Anodes for Solid Oxide Fuel Cells

Conference Proceeding
Turnbull, R., Davidson, A., Shearer, N., & Wilson, C. (2016)
Cellulose as a Pore Former in Electroless Co-Deposited Anodes for Solid Oxide Fuel Cells. In Proceedings of the 12th EUROPEAN SOFC & SOE FORUM. , (1-11
A study was conducted to investigate the feasibility of cellulose as a pore former in the manufacture of Solid Oxide Fuel Cell (SOFC) anodes using Electroless Co-Deposition (E...

Development of process control methodology for tracking the quality and safety of pain, agitation and sedation management in critical care units

Journal Article
Walsh, T. S., Kydonaki, K., Lee, R. J., Everingham, K., Antonelli, J., Harkness, R. T., …Weir, C. J. (2016)
Development of process control methodology for tracking the quality and safety of pain, agitation and sedation management in critical care units. Critical Care Medicine, 44(3), 564-574. https://doi.org/10.1097/CCM.0000000000001463
Objective: To develop sedation, pain, and agitation quality measures using process control methodology and evaluate their properties in clinical practice. Design: A Sedation ...

Manufacture of solid oxide fuel cells using electroless c0deposition - a review of work carried out at Edinburgh Napier University.

Presentation / Conference
Davidson, A., Wilson, C., & Shearer, N. (2015, July)
Manufacture of solid oxide fuel cells using electroless c0deposition - a review of work carried out at Edinburgh Napier University. Paper presented at ECS COnference on Electrochemical Energy Conversion & Storage with SOFC_XIV, Glasgow, Scotland
This paper reviews work carried out at Edinburgh Napier University on the manufacture of anodes and cathodes for solid oxide fuel cells (SOFCs) using electroless co-deposition...

On the Influence of Surfactant Incorporation during Electroless Nickel Plating

Journal Article
Nwosu, N., Davidson, A., Hindle, C., & Barker, M. (2012)
On the Influence of Surfactant Incorporation during Electroless Nickel Plating. Industrial & engineering chemistry research, 51(16), 5635-5644. https://doi.org/10.1021/ie202625n
The effects of surfactants on the dynamics and characteristics of plain and composite electroless nickel plating (ENP) are highlighted and discussed herein. An outline of the ...

Two years of measured performance of a medium-sized building integrated photovoltaic facility at Napier University, Edinburgh.

Conference Proceeding
Clarke, P., Davidson, A., Kubie, J. & Muneer, T. (2007)
Two years of measured performance of a medium-sized building integrated photovoltaic facility at Napier University, Edinburgh

An investigation of possible improvements in accuracy of regressions between diffuse and global solar irradiation.

Journal Article
Clarke, P., Munawwar, S., Davidson, A., Muneer, T. & Kubie, J. (2007)
An investigation of possible improvements in accuracy of regressions between diffuse and global solar irradiation. Building Service Engineering Research and Technology. 28, 189-197. doi:10.1177/0143624407076907
Horizontal hourly and sub-hourly diffuse and beam irradiance are required for the estimation of global irradiance on a given tilted surface. This information is used by engine...

Embodied energy analysis of aluminium-clad windows.

Journal Article
Asif, M., Davidson, A. & Muneer, T. (2001)
Embodied energy analysis of aluminium-clad windows. Building Services Engineering Research and Technology. 22, 195-199. doi:10.1191/014362401701524226. ISSN 0143-6244
This article provides an overview of energy loads associated with the application of powder coated aluminium profiles on the exterior wooden surface of double glazed windows. ...

Powder-coated Al-clad Windows: characteristics and performance.

Conference Proceeding
Asif, M., Davidson, A., & Muneer, T. (2000)
Powder-coated Al-clad Windows: characteristics and performance. In The Whole-life performance of facades - Proceedings, 63-69
Nor-Dan is the biggest windows manufacturing company in Norway and has been producing aluminium clad windows for the past 30 years. Over the last twenty years, powder coated a...
19 results

The manufacture of gas turbine compressor components by Metal Injection Moulding

2011 - 2015
Andrew Russell | Director of Studies: Mike Barker | Second Supervisor: Alan Davidson

Fabrication and characterisation of planar and tubular solid oxide fuel cell anodes

2010 - 2013
Yanzhao Zhang | Director of Studies: Alan Davidson | Second Supervisor: Mike Barker

Photogrammetric and stereo vision techniques for evaluating material properties in timber and timber-based composite structures

2010 - 2016
Dr Ahmed Mohamed | Director of Studies: Prof Johnson Zhang | Second Supervisor: Prof Abdy Kermani

Processing, characterisation and durability of tubular solid oxide fuel cell cathodes

2010 - 2015
Dong Wang | Director of Studies: Alan Davidson | Second Supervisor: Mike Barker

Environmental sustainability in construction: a study of embodied energy in low-cost housing for developing countries

2009 - 2015
Effiness Gama | Director of Studies: Dr Andrew Brown

Optimisation of electroless co-deposited solid oxide fuel cell electrodes

2009 - 2013
Okwuchukwu Nwosu | Director of Studies: Alan Davidson | Second Supervisor: Mike Barker

Computer aided synthesis and optimisation of electronic logic circuits

2008 - 2012
Ban Al-Jassani | Director of Studies: Abid Almaini | Second Supervisor: Dr Neil Urquhart

Conditions required for spinning continuous fibres from cellulose nanofibrils

2007 - 2012
The thesis describes a programme of work to develop a novel cellulose based fibre. The most important innovative step in th...
Zurine Hernandez | Director of Studies: Prof Philip Turner | Second Supervisor: Colin Hindle

Mathematical modelling of BIPV-micro wind system: production, storage and usages

2006 - 2009
Peter Clarke | Director of Studies: Prof Tariq Muneer | Second Supervisor: Alan Davidson

Novel processing of solid oxide fuel cell anodes

2006 - 2011
Nor Bahiyah Baba | Director of Studies: Alan Davidson | Second Supervisor: Prof Tariq Muneer

Date


Date