Date


Download Available

142 results

Wood properties & strength grading

Presentation / Conference
Ridley-Ellis, D. (2022, December)
Wood properties & strength grading. Presented at James Jones & Sons Architects' and Structural Engineers' Open Day, Lockerbie
James Jones & Sons held an open day for architects and structural engineers at its flagship sawmill site in Lockerbie. "James Jones & Sons' new visitor building at its flags...

Correction of Evanescent Wave Influence on the Flexural Wave Velocity and Wavelength Estimation Based on a Mode Shape Function

Journal Article
Pantelić, F., Šumarac Pavlović, D., Mijić, M., & Ridley-Ellis, D. (2022)
Correction of Evanescent Wave Influence on the Flexural Wave Velocity and Wavelength Estimation Based on a Mode Shape Function. Archives of Acoustics, 47(4), 539-546. https://doi.org/10.24425/aoa.2022.142017
The aim of this research is to use a simple acoustic method of a very near field recording, which enables measurement and display of oscillation modes, to estimate the velocit...

Design for deconstruction and reuse: Case study Everett Grand

Report
Cramer, M., Jackson, N., & Sandin, Y. (2022)
Design for deconstruction and reuse: Case study Everett Grand. ForestValue

Design of Timber Buildings for Deconstruction and Reuse — Three methods and five case studies

Report
Sandin, Y., Shotton, E., Cramer, M., Sandberg, K., Walsh, S. J., González-Alegre, V., …Zabala Mejia, A. (2022)
Design of Timber Buildings for Deconstruction and Reuse — Three methods and five case studies. ForestValue
There is a need for a shift towards circular economy in the construction sector and design philosophies as Design for Deconstruction and Reuse (DfDR) and Design for Adaptabili...

The relationship between bending and tension strength of Irish and UK spruce and pine

Journal Article
Gil-Moreno, D., Ridley-Ellis, D., O'Ceallaigh, C., & Harte, A. M. (2022)
The relationship between bending and tension strength of Irish and UK spruce and pine. European Journal of Wood and Wood Products, 80, 585-596. https://doi.org/10.1007/s00107-022-01787-6
The correct characterisation of wood properties is fundamental for the best utilisation of resources. In Europe, grading is defined by strength classes that are determined bas...

More than the sum of their parts - How UK Timber Houses can be Deconstructed and Reused

Conference Proceeding
Cramer, M., & Sandin, Y. (2021)
More than the sum of their parts - How UK Timber Houses can be Deconstructed and Reused. In Proceedings of the 17th meeting of the Northern European Network for Wood Science and Engineering (WSE 2021) (108-110). https://doi.org/10.5755/e01.9786090217627
The InFutUReWood project (infuturewood.info) focuses on the reuse of structural timber and is working on improving the design of buildings to facilitate deconstruction and reu...

Test Machine Effect in the determination of modulus of elasticity for strength-graded timber

Conference Proceeding
Gil-Moreno, D., Ridley-Ellis, D., & Harte, A. M. (2021)
Test Machine Effect in the determination of modulus of elasticity for strength-graded timber. In WCTE 2021: World Conference on Timber Engineering Proceedings
This paper investigates if the relationship between the global and local moduli of elasticity (MoE), measured in bending tests, is affected by the test machines employed, and ...

Perception and use of timber in construction: A case study of Ireland and the UK

Conference Proceeding
O'Ceallaigh, C., Gil-Moreno, D., Ridley-Ellis, D., & Harte, A. M. (2021)
Perception and use of timber in construction: A case study of Ireland and the UK. In WCTE 2021: World Conference on Timber Engineering Proceedings
A survey was carried out to examine the perception of timber in construction among industry stakeholders within northwest Europe. The survey received responses from 17 countri...

Estimating mechanical properties of clear wood from ten‐year‐old Melia azedarach trees using the stress wave method

Journal Article
Van Duong, D., & Ridley-Ellis, D. (2021)
Estimating mechanical properties of clear wood from ten‐year‐old Melia azedarach trees using the stress wave method. European Journal of Wood and Wood Products, 79(4), 941-949. https://doi.org/10.1007/s00107-021-01664-8
The objective of this study was to examine the potential of stress wave velocity (SWV) as a rapid and non-destructive method to estimate the mechanical properties of Melia aze...

A brief look at alternative species in the UK

Conference Proceeding
Adams, S. H., & Ridley-Ellis, D. J. (2021)
A brief look at alternative species in the UK. In Proceedings of the 16th Annual Meeting of the Northern European Network for Wood Science and Engineering – WSE2020 (68-70

Date


83 results

Digital Transformation of the Building Standards System

2022 - 2023
This project will support the digital transformation of the building standards system in Scotland by supporting a strengthened compliance system and putting in place the tools to develop a digital go...
Funder: Built Environment - Smarter Transformation (formerly CSIC) | Value: £11,714

Augmented Virtual Reality Enhanced Building Information Modelling Technology for Bamboo-Timber Grid-shells

2022 - 2024
This project aims to develop the state-of-the-art building information modelling technology enhanced by augmented virtual reality function for design, manufacturing and building of the bamboo-timber g...
Funder: Construction Industry Council of Hong Kong | Value: £165,570

Researching and proposing a standard rule of responsibility for embodied carbon emissions through the value chain

2021 - 2026
Researching and proposing a standard rule of responsibility for embodied carbon emissions through the value chain
Funder: Scottish Government | Value: £15,195

Computational Fluid Dynamics (CFD) Modelling for the Design of Spill-proof Coffee Cup Lid

2021 - 2022
The project team conducted CFD modelling for the Design of Spill-proof Coffee Cup lid designed and patented by SipSecure Ltd. The results of the numerical simulation will be utilised the product desig...
Funder: Scottish Funding Council | Value: £5,000

Monitoring expansion rate of timber for Jacket Pile Gripper Application

2021 - 2022
Monitoring expansion rate of timber for Jacket Pile Gripper Application
Funder: Scottish Funding Council | Value: £5,000

Development of net-zero homes using a digital twinned building performance analysis

2021 - 2025
Edinburgh Napier University is developing together with other consortium members the Edinburgh Home Programme that will demonstrate a new business model based on collaborative procurement, whole-life ...
Funder: Energy Technology Partnership | Value: £60,000

Phase I: Innovation and commercialisation of homegrown wood fibre insulation

2021 - 2022
A project that seeks to outline the innovation and commercial use of natural fibre insulation products in the UK. It will be based on a gap analysis of products that are currently available from natu...
Funder: Scottish Forestry | Value: £37,961

HyHo Silver

2021 - 2021
The objective of the project is to examine the practicality of the European Marine Energy Centre (EMEC) being able to offer a fuel cell / combined heat and power installation at a local jewellery comp...
Funder: Energy Technology Partnership | Value: £10,000

Homegrown Bio-Offsite Manufactured (Bio-OSM) Accelerator

2020 - 2020
The UK has the renewable natural resource, internationally recognised expertise, and technical capabilities necessary to be at the forefront of a new approach to delivering a sustainable and resilient...
Funder: Innovate UK | Value: £13,365

CSIC - Edinburgh Home Demonstrator

2020 - 2024
The “Edinburgh Home Demonstrator” (EHD) Programme seeks to demonstrate the time, cost, quality, and carbon improvements in new affordable housing programme through the following projects: 1. Developme...
Funder: Built Environment - Smarter Transformation (formerly CSIC) | Value: £205,463