Research Output

Measurement, Modeling and Simulation of Photovoltaic Degradation Rates

  Photovoltaic degradation rates play a vital role in visualizing and analyzing the performance of the PV modules over the long run. A site survey is conducted to calculate PV degradation rates. The results have shown that for the first three years since the initial installation, the degradation rates have remained in line with the manufacturer values (i.e., less than 0.6%), while the next two years the degradation rates have almost increased by 40%. This is due to discoloration of the encapsulant causing the reduction of the short circuit current (Isc). Mathematically, modeling such visual loss factors has not considered so far. The visual loss factor equation is developed and incorporated in the output current equation of the PV module. Further, the I-V curves are simulated and compared with the measured I-V curves. The results have shown an acceptable error percentage of around 0.3%.

Citation

Honnurvali, M. S., Gupta, N., Goh, K., & umar, T. (2020). Measurement, Modeling and Simulation of Photovoltaic Degradation Rates. In Modelling, Simulation and Intelligent Computing: Proceedings of MoSICom 2020. , (56-63). https://doi.org/10.1007/978-981-15-4775-1_7

Authors

Monthly Views:

Available Documents