Thermal performance of semitransparent CdTe BIPV window at temperate climate

Research Output

Semi-transparent photovoltaic (PV) technology is attractive for building-integrated photovoltaics (BIPV) due to its ability to lower the admitted solar heat gain, to control the penetrating daylight and to generate onsite benevolent direct current power. In this work, semi-transparent cadmium telluride (CdTe) based BIPV as window was experimentally characterized using outdoor test cell in temperate UK climate. Spectral measurement confirmed its 25% visible transmission and 12% solar transmission. Thermal transmission and solar heat gain coefficient were calculated from measured thermal data. Overall heat transfer coefficient (U-value) of 2.7 W/m2 K was found for outdoor and indoor characterization of CdTe BIPV window. A comparison with single glazed window has been produced emphasis its feasibility for Facade buildings.

Type:

Article
Date:

03 December 2019
Publication Status:

Published
Publisher

Pergamon
DOI:

10.1016/j.solener.2019.11.084
Cross Ref:

10.1016/j.solener.2019.11.084
ISSN:

0038-092X
Funders:

Historic Funder (pre-Worktribe)

http://researchrepository.napier.ac.uk/output/2818468 Alrashidi, H., Ghosh, A., Issa, W., Sellami, N., Mallick, T. K., & Sundaram, S. (2020). Thermal performance of semitransparent CdTe BIPV window at temperate climate. Solar Energy, 195, 536-543. https://doi.org/10.1016/j.solener.2019.11.084

Citation

Alrashidi, H., Ghosh, A., Issa, W., Sellami, N., Mallick, T. K., & Sundaram, S. (2020). Thermal performance of semitransparent CdTe BIPV window at temperate climate. Solar Energy, 195, 536-543. https://doi.org/10.1016/j.solener.2019.11.084