Viscoelastic and Mechanical Properties of Multi-layered Graphene Polyester Composites

Research Output

In this study, multi-layered-graphene (MLG) reinforced unsaturated polyester (UP) were prepared by adding different weight percentage of graphene in polyester resin and subsequently cross linked using mixture of methyl ethyl ketone peroxide. The mechanical properties of polyester-graphene were also studied. The maximum increase Tg was obtained from 80.85?C to 87.59?C in case of 0.7 wt\%. The Vickers microhardiness (HV) was increased up to 116\% compared to monolithic polyester. Flexural modulus of 0.7 wt\% reinforcement recorded the highest modulus with 1.19Gpa. It was found that the addition of multi-layered graphene significantly improved the dynamic and mechanical properties of the composites.

Date:

31 December 2016
Publication Status:

Published
Funders:

Historic Funder (pre-Worktribe)

http://researchrepository.napier.ac.uk/output/2686958 <p>Saharudin, M., Shyha, I., & Inam, F. (2016). Viscoelastic and Mechanical Properties of Multi-layered Graphene Polyester Composites. In <i>ICAME2016 - 2nd International Conference on Advances in Mechanical Engineering</i></p>

Citation

Saharudin, M., Shyha, I., & Inam, F. (2016). Viscoelastic and Mechanical Properties of Multi-layered Graphene Polyester Composites. In ICAME2016 - 2nd International Conference on Advances in Mechanical Engineering