Date


Research Centres Groups

Download Available

42 results

Wood properties & strength grading

Presentation / Conference
Ridley-Ellis, D. (2022, December)
Wood properties & strength grading. Presented at James Jones & Sons Architects' and Structural Engineers' Open Day, Lockerbie
James Jones & Sons held an open day for architects and structural engineers at its flagship sawmill site in Lockerbie. "James Jones & Sons' new visitor building at its flags...

Design for deconstruction and reuse: Case study Everett Grand

Report
Cramer, M., Jackson, N., & Sandin, Y. (2022)
Design for deconstruction and reuse: Case study Everett Grand. ForestValue

Design of Timber Buildings for Deconstruction and Reuse — Three methods and five case studies

Report
Sandin, Y., Shotton, E., Cramer, M., Sandberg, K., Walsh, S. J., González-Alegre, V., …Zabala Mejia, A. (2022)
Design of Timber Buildings for Deconstruction and Reuse — Three methods and five case studies. ForestValue
There is a need for a shift towards circular economy in the construction sector and design philosophies as Design for Deconstruction and Reuse (DfDR) and Design for Adaptabili...

The relationship between bending and tension strength of Irish and UK spruce and pine

Journal Article
Gil-Moreno, D., Ridley-Ellis, D., O'Ceallaigh, C., & Harte, A. M. (2022)
The relationship between bending and tension strength of Irish and UK spruce and pine. European Journal of Wood and Wood Products, 80, 585-596. https://doi.org/10.1007/s00107-022-01787-6
The correct characterisation of wood properties is fundamental for the best utilisation of resources. In Europe, grading is defined by strength classes that are determined bas...

More than the sum of their parts - How UK Timber Houses can be Deconstructed and Reused

Conference Proceeding
Cramer, M., & Sandin, Y. (2021)
More than the sum of their parts - How UK Timber Houses can be Deconstructed and Reused. In Proceedings of the 17th meeting of the Northern European Network for Wood Science and Engineering (WSE 2021) (108-110). https://doi.org/10.5755/e01.9786090217627
The InFutUReWood project (infuturewood.info) focuses on the reuse of structural timber and is working on improving the design of buildings to facilitate deconstruction and reu...

Test Machine Effect in the determination of modulus of elasticity for strength-graded timber

Conference Proceeding
Gil-Moreno, D., Ridley-Ellis, D., & Harte, A. M. (2021)
Test Machine Effect in the determination of modulus of elasticity for strength-graded timber. In WCTE 2021: World Conference on Timber Engineering Proceedings
This paper investigates if the relationship between the global and local moduli of elasticity (MoE), measured in bending tests, is affected by the test machines employed, and ...

Perception and use of timber in construction: A case study of Ireland and the UK

Conference Proceeding
O'Ceallaigh, C., Gil-Moreno, D., Ridley-Ellis, D., & Harte, A. M. (2021)
Perception and use of timber in construction: A case study of Ireland and the UK. In WCTE 2021: World Conference on Timber Engineering Proceedings
A survey was carried out to examine the perception of timber in construction among industry stakeholders within northwest Europe. The survey received responses from 17 countri...

Estimating mechanical properties of clear wood from ten‐year‐old Melia azedarach trees using the stress wave method

Journal Article
Van Duong, D., & Ridley-Ellis, D. (2021)
Estimating mechanical properties of clear wood from ten‐year‐old Melia azedarach trees using the stress wave method. European Journal of Wood and Wood Products, 79(4), 941-949. https://doi.org/10.1007/s00107-021-01664-8
The objective of this study was to examine the potential of stress wave velocity (SWV) as a rapid and non-destructive method to estimate the mechanical properties of Melia aze...

A brief look at alternative species in the UK

Conference Proceeding
Adams, S. H., & Ridley-Ellis, D. J. (2021)
A brief look at alternative species in the UK. In Proceedings of the 16th Annual Meeting of the Northern European Network for Wood Science and Engineering – WSE2020 (68-70

A case study of timber demolition recycling in the UK

Conference Proceeding
Cramer, M., & Ridley-Ellis, D. (2021)
A case study of timber demolition recycling in the UK. In Proceedings of the 16th Annual Meeting of the Northern European Network for Wood Science and Engineering – WSE2020 (89-91
25 results

Phase I: Innovation and commercialisation of homegrown wood fibre insulation

2021 - 2022
A project that seeks to outline the innovation and commercial use of natural fibre insulation products in the UK. It will be based on a gap analysis of products that are currently available from natu...
Funder: Scottish Forestry | Value: £37,961

SIRT 2020-2021 (WP1&2)

2020 - 2021
Our research activities are focused on understanding the physical and mechanical properties of wood and how these affect its performance in different applications. Our main aim is to better understand...
Funder: Scottish Forestry | Value: £165,472

Digitisation of Home Grown Timber Products

2020 - 2021
The aim of this project is to determine the potential for the symbiosis of renewable resource (forestry, woody bio-mass and naturally replenishable) and the high value manufacture of a resilient and s...
Funder: Scottish Forestry | Value: £30,002

SIRT 2019-20 (WP1&2)

2019 - 2020
Our research activities are focused on understanding the physical and mechanical properties of wood and how these affect its performance in different applications. Our main aim is to better understand...
Funder: Scottish Forestry | Value: £96,000

InFutUReWood

2019 - 2022
Timber and construction research
Funder: European Commission | Value: £122,942

SIRT 2018-19 (WP1&2)

2018 - 2019
Our research activities are focused on understanding the physical and mechanical properties of wood and how these affect its performance in different applications. Our main aim is to better understand...
Funder: Scottish Forestry | Value: £99,000

SIRT WP2 2017-18

2017 - 2018
Timber grading standards support ensuring standards are good for the domestic timber industries, and supporting industry in using them
Funder: Scottish Forestry | Value: £42,500

SIRT WP1 2017-18

2017 - 2018
Applied research and knowledge transfer addressing industry needs – as set out by the SIRT management board. This includes providing information and advice to industry sponsors
Funder: Scottish Forestry | Value: £107,500

YOKER 2 - CCG (Scotland) Ltd

2017 - 2018
Buildings , energy and acoustics project through CSIC
Funder: Built Environment - Smarter Transformation (formerly CSIC) | Value: £46,926

State of the art review of solar kiln technology

2017 - 2017
Forestry Commission Scotland have asked us to carry out a short review of solar kiln technology and, specifically, a kiln design proposed by a small Scottish sawmill. The report is for the public ben...
Funder: Scottish Forestry | Value: £525