Bim-enabled health & safety analysis of cross laminated timber onsite assembly process.
Conference Proceeding
Duncheva, T., BuHamdan, S., Hairstans, R., & Al-Hussein, M. (2018)
Bim-enabled health & safety analysis of cross laminated timber onsite assembly process. In A. G. BRUZZONE, F. LONGO, F. DE FELICE, C. FRYDMAN, M. MASSEI, & A. SOLIS (Eds.), MAS 2018
There is a global need for sustainable urban housing and offsite timber systems such as Cross Laminated Timber construction can be part of the solution to this need. However, ...
Some thresholds for grading British grown spruce to optimised strength classes using longitudinal resonance
Conference Proceeding
Ridley-Ellis, D., Adams, S., & Lehneke, S. (2018)
Some thresholds for grading British grown spruce to optimised strength classes using longitudinal resonance
The main commercial species in the UK and Ireland is Sitka spruce (Picea sitchensis), which is graded in combination with a small amount of Norway spruce (P. abies). It is typ...
Automatic code compliance with multi-dimensional data fitting in a BIM context
Journal Article
Patlakas, P., Livingstone, A., Hairstans, R., & Neighbour, G. (2018)
Automatic code compliance with multi-dimensional data fitting in a BIM context. Advanced engineering informatics, 38, 216-231. https://doi.org/10.1016/j.aei.2018.07.002
BIM-based tools can contribute to addressing some of the challenges faced by structural engineering practitioners. A BIM-based framework for the development of components that...
The daily cycle of moisture content expansion and contraction in UK-grown Sitka spruce trees
Presentation / Conference
Adams, S., & Ridley-Ellis, D. (2018, June)
The daily cycle of moisture content expansion and contraction in UK-grown Sitka spruce trees. Paper presented at Timber 2018, London
The diameter of five dominant Sitka spruce (Picea sitchensis) trees at Griffin Forest (near Aberfeldy, Scotland) were monitored at two minute intervals with dendrometers betwe...
Strength grading of timber in the UK in 2018
Presentation / Conference
Ridley-Ellis, D. (2018, June)
Strength grading of timber in the UK in 2018. Presented at Timber 2018
This paper summarises the state-of-the-art of strength grading of UK-grown timber. It lists the following information along with the primary references: visual grading grades ...
Why method matters: temporal, spatial and physical variations in LCA and their impact on choice of structural system
Journal Article
Moncaster, A., Pomponi, F., Symons, K., & Guthrie, P. (2018)
Why method matters: temporal, spatial and physical variations in LCA and their impact on choice of structural system. Energy and Buildings, https://doi.org/10.1016/j.enbuild.2018.05.039
Life Cycle Assessment (LCA) is increasingly used as an early-stage design-decision tool to support choices of structural system. However LCA modellers must first make numerous...
Carbon mitigation in the built environment: an input-output analysis of building materials and components in the UK
Journal Article
Pomponi, F., & D'Amico, B. (2018)
Carbon mitigation in the built environment: an input-output analysis of building materials and components in the UK. Procedia CIRP, 69, 189-193. https://doi.org/10.1016/j.procir.2017.10.007
The circular economy has set out a new paradigm for a much
needed shift from eco-efficiency to eco-effectiveness. Buildings are top contributor globally for resource use and w...
Mass Customisable Roofing Solutions for the New Build and Retrofit Markets in the UK
Conference Proceeding
Plowas, W., Hairstans, R., & Felingham, J. (2018)
Mass Customisable Roofing Solutions for the New Build and Retrofit Markets in the UK. In MOC Summit Proceedings
Major house builders and contractors in the UK are seeking alternative solutions to form the structural frame of pitched roofs for various reasons; speed, health and safety, q...
The merits of varying forms of mass timber products for offsite and modular construction
Conference Proceeding
Hairstans, R., Smith, R., & Wilson, P. (2018)
The merits of varying forms of mass timber products for offsite and modular construction
Mass timber is a family of Solid Laminate Timber Systems (SLTS) formed from smaller sections of timber connected by glue, mechanical fixings, moisture movement or a combinatio...
Accuracy and reliability: a computational tool to minimise steel mass and carbon emissions at early-stage structural design
Journal Article
D’Amico, B., & Pomponi, F. (2018)
Accuracy and reliability: a computational tool to minimise steel mass and carbon emissions at early-stage structural design. Energy and Buildings, 168, 236-250. https://doi.org/10.1016/j.enbuild.2018.03.031
Building structures often represent the element with the largest mass in a building project, with significant effects on the buildings life cycle environmental impacts. Amongs...