24 results

Wood properties & strength grading

Presentation / Conference
Ridley-Ellis, D. (2022, December)
Wood properties & strength grading. Presented at James Jones & Sons Architects' and Structural Engineers' Open Day, Lockerbie
James Jones & Sons held an open day for architects and structural engineers at its flagship sawmill site in Lockerbie. "James Jones & Sons' new visitor building at its flags...

The relationship between bending and tension strength of Irish and UK spruce and pine

Journal Article
Gil-Moreno, D., Ridley-Ellis, D., O'Ceallaigh, C., & Harte, A. M. (2022)
The relationship between bending and tension strength of Irish and UK spruce and pine. European Journal of Wood and Wood Products, 80, 585-596. https://doi.org/10.1007/s00107-022-01787-6
The correct characterisation of wood properties is fundamental for the best utilisation of resources. In Europe, grading is defined by strength classes that are determined bas...

Test Machine Effect in the determination of modulus of elasticity for strength-graded timber

Conference Proceeding
Gil-Moreno, D., Ridley-Ellis, D., & Harte, A. M. (2021)
Test Machine Effect in the determination of modulus of elasticity for strength-graded timber. In WCTE 2021: World Conference on Timber Engineering Proceedings
This paper investigates if the relationship between the global and local moduli of elasticity (MoE), measured in bending tests, is affected by the test machines employed, and ...

Estimating mechanical properties of clear wood from ten‐year‐old Melia azedarach trees using the stress wave method

Journal Article
Van Duong, D., & Ridley-Ellis, D. (2021)
Estimating mechanical properties of clear wood from ten‐year‐old Melia azedarach trees using the stress wave method. European Journal of Wood and Wood Products, 79(4), 941-949. https://doi.org/10.1007/s00107-021-01664-8
The objective of this study was to examine the potential of stress wave velocity (SWV) as a rapid and non-destructive method to estimate the mechanical properties of Melia aze...

A brief look at alternative species in the UK

Conference Proceeding
Adams, S. H., & Ridley-Ellis, D. J. (2021)
A brief look at alternative species in the UK. In Proceedings of the 16th Annual Meeting of the Northern European Network for Wood Science and Engineering – WSE2020 (68-70

A case study of timber demolition recycling in the UK

Conference Proceeding
Cramer, M., & Ridley-Ellis, D. (2021)
A case study of timber demolition recycling in the UK. In Proceedings of the 16th Annual Meeting of the Northern European Network for Wood Science and Engineering – WSE2020 (89-91

Analysis of a wooden specimen's mechanical properties through acoustic measurements in the very near field

Journal Article
Pantelić, F., Mijić, M., Šumarac Pavlović, D., Ridley-Ellis, D., & Dudeš, D. (2020)
Analysis of a wooden specimen's mechanical properties through acoustic measurements in the very near field. Journal of the Acoustical Society of America, 147(4), EL320-EL325. https://doi.org/10.1121/10.0001030
This paper presents the method for prediction of some basic mechanical parameters of a wood specimen by using simple instrumentation. The standard acoustic method for assessme...

The Mechanical and Resonance Assessment of Large Clear Samples of UK-Grown Beech Wood

Journal Article
Ridley-Ellis, D. (2019)
The Mechanical and Resonance Assessment of Large Clear Samples of UK-Grown Beech Wood. Pro Ligno, 15(4), 32-39
The paper presents the results of non-destructive longitudinal resonance (impulse excitation technique), and mechanical flexural testing, of a batch of European beech wood (Fa...

Influence of knot area indexes on tension strength of Sitka spruce

Conference Proceeding
Gil-Moreno, D., Ridley-Ellis, D., & Harte, A. M. (2019)
Influence of knot area indexes on tension strength of Sitka spruce. In Proceedings of the 15th Annual Meeting of the Northern European Network for Wood Science and Engineering
It is well known that knots can reduce the strength of timber, and the selection of “critical section” for testing to EN 408 and EN 384 is typically based on the size and posi...

Grading of British spruce cladding battens by ring width for density, fastener performance and fire

Conference Proceeding
Ridley-Ellis, D. (2019)
Grading of British spruce cladding battens by ring width for density, fastener performance and fire. In Proceedings of the 15th Annual Meeting of the Northern European Network for Wood Science and Engineering
The UK has a British Standard for external timber cladding, BS8605-1, in which support battens are defined as timber components of a section, grade, and durability, suitable f...
10 results

SIRT 2020-2021 (WP1&2)

2020 - 2021
Our research activities are focused on understanding the physical and mechanical properties of wood and how these affect its performance in different applications. Our main aim is to better understand...
Funder: Scottish Forestry | Value: £165,472

SIRT 2019-20 (WP1&2)

2019 - 2020
Our research activities are focused on understanding the physical and mechanical properties of wood and how these affect its performance in different applications. Our main aim is to better understand...
Funder: Scottish Forestry | Value: £96,000

SIRT 2018-19 (WP1&2)

2018 - 2019
Our research activities are focused on understanding the physical and mechanical properties of wood and how these affect its performance in different applications. Our main aim is to better understand...
Funder: Scottish Forestry | Value: £99,000

SIRT WP2 2017-18

2017 - 2018
Timber grading standards support ensuring standards are good for the domestic timber industries, and supporting industry in using them
Funder: Scottish Forestry | Value: £42,500

SIRT WP1 2017-18

2017 - 2018
Applied research and knowledge transfer addressing industry needs – as set out by the SIRT management board. This includes providing information and advice to industry sponsors
Funder: Scottish Forestry | Value: £107,500

Extractives database support

2017 - 2018
Maintenance and hosting of website database developed in previous project
Funder: Scottish Forestry | Value: £3,000

Extractive components of Scottish roundwood

2015 - 2015
To investigate the extractives that are available in Sitka sprice, Scots pine and hybrid larch. To understand how the extractives vary between crop parts e.g. heartwood, bark, stumps, brash and thinni...
Funder: Scottish Forestry | Value: £15,623

Timber grading standards support (Workpackage 2)

2014 - 2018
Provide support to the forest industry through representation on various GB and European committees, and to provide dissemination and facilitate events to the sawmill industy.
Funder: Scottish Forestry | Value: £130,000

Larch grading setting

2014 - 2015
To create approved settings for existing x-ray and acoustic grading machines for British larch whilst creating knowledge on dimensional tolerance and creating a subset of sample resource for Proof of ...
Funder: Scottish Forestry | Value: £105,000

SIRT workplan 2014/17 (Workpackage 1)

2014 - 2018
Improving industry knowledge of timer properties and utilisation potential of 'alternative species', testing 6 different species. Disseminate and promote effectively the outputs of the programme, incl...
Funder: Scottish Forestry | Value: £289,999