73 results

Eco-friendly 3D Printing Mortar with Low Cement Content: Investigation on Printability and Mechanical Properties

Journal Article
Sukontasukkul, P., Komkham, S., Jamnam, S., Zhang, H., Fujikake, K., Puttiwongrak, A., & Hansapinyo, C. (2024)
Eco-friendly 3D Printing Mortar with Low Cement Content: Investigation on Printability and Mechanical Properties. Civil Engineering Journal, 10(3), https://doi.org/10.28991/CEJ-2024-010-03-010
The conventional approach to achieving optimal printability and buildability in 3D printing mortar relies heavily on cement, which is both costly and environmentally detriment...

Use of buffer treatment to utilize local non-alkali tolerant bacteria in microbial induced calcium carbonate sedimentation in concrete crack repair

Journal Article
Pianfuengfoo, S., Kongtunjanphuk, S., Zhang, H., & Sukontasukkul, P. (2024)
Use of buffer treatment to utilize local non-alkali tolerant bacteria in microbial induced calcium carbonate sedimentation in concrete crack repair. Heliyon, 10(4), Article e26776. https://doi.org/10.1016/j.heliyon.2024.e26776
Concrete often suffers cracks due to its low tensile strength. The repair process can vary ranging from surface coating, grouting, and strengthening. Microbial induced calcium...

Characteristic and Allowable Compressive Strengths of Dendrocalamus Sericeus Bamboo Culms with/without Node Using Artificial Neural Networks

Journal Article
Buachart, C., Hansapinyo, C., Sukontasukkul, P., Zhang, H., Sae-Long, W., Chetchotisak, P., & O'Brien, T. E. (2024)
Characteristic and Allowable Compressive Strengths of Dendrocalamus Sericeus Bamboo Culms with/without Node Using Artificial Neural Networks. Case Studies in Construction Materials, 20, e02794. https://doi.org/10.1016/j.cscm.2023.e02794
The strength of construction material is a crucial consideration in the process of structural design and construction. Conventional materials such as concrete or steel have be...

Force monitoring of Galfan cables in a long-span cable-truss string-support system based on the magnetic flux method

Journal Article
Zhang, Y., Tian, X., Xia, J., & Zhang, H. (2023)
Force monitoring of Galfan cables in a long-span cable-truss string-support system based on the magnetic flux method. Structural Monitoring and Maintenance, 10(3), 261-281. https://doi.org/10.12989/smm.2023.10.3.261
Magnetic flux sensors are commonly used in monitoring the cable force, but the application of the sensors in large diameter non-closed Galfan cables, as those adopted in Yueqi...

Precise determination of initial printable time for cement mortar 3D printing using a derivative method

Journal Article
Sukontasukkul, P., Maho, B., Komkham, S., Pianfuengfoo, S., Zhang, H. (., Yoo, D., …Chindaprasirt, P. (2023)
Precise determination of initial printable time for cement mortar 3D printing using a derivative method. Rapid Prototyping Journal, 29(9), 1888-1903. https://doi.org/10.1108/rpj-03-2023-0087
Purpose This study aims to propose a technique that establishes a mathematical relationship between width and time, and utilizes a derivative method to determine the initial p...

An artificial neural network (ANN) approach for early cost estimation of concrete bridge systems in developing countries: the case of Sri Lanka

Journal Article
Fernando, N., T.A., K. D., & Zhang, H. (. (2024)
An artificial neural network (ANN) approach for early cost estimation of concrete bridge systems in developing countries: the case of Sri Lanka. Journal of Financial Management of Property and Construction, 29(1), 23-51. https://doi.org/10.1108/JFMPC-09-2022-0048
Purpose The Government’s investment in infrastructure projects is considerably high, especially in bridge construction projects. Government authorities must establish an initi...

Mechanical behavior and constitutive model of sustainable concrete: seawater and sea-sand recycled aggregate concrete

Journal Article
Feng, W., Tang, Y., Yang, Y., Cheng, Y., Qiu, J., Zhang, H., …Namdar, A. (2023)
Mechanical behavior and constitutive model of sustainable concrete: seawater and sea-sand recycled aggregate concrete. Construction and Building Materials, 364, Article 130010. https://doi.org/10.1016/j.conbuildmat.2022.130010
Resources such as fresh water and river sand have become scarce in some areas around the world because of the considerable increase in infrastructural construction. To overcom...

Use of Cement Mortar Incorporating Superabsorbent Polymer as a Passive Fire -Protective Layer

Journal Article
Jamnam, S., Sua-iam, G., Maho, B., Pianfuengfoo, S., Sappakittipakorn, M., Zhang, H., …Sukontasukkul, P. (2022)
Use of Cement Mortar Incorporating Superabsorbent Polymer as a Passive Fire-Protective Layer. Polymers, 14(23), Article 5266. https://doi.org/10.3390/polym14235266
Concrete structures, when exposed to fire or high temperatures for a certain time, could suffer partial damage or complete structural failure. Passive fire-protective coating ...

Real-Time Vibration Measurement and Inverse Analysis for Dynamic Properties of an Axisymmetric Masonry Structure

Journal Article
Buachart, C., Hansapinyo, C., Tantisukumal, N., Miyamoto, M., Matsushima, M., Imjai, T., & Zhang, H. (in press)
Real-Time Vibration Measurement and Inverse Analysis for Dynamic Properties of an Axisymmetric Masonry Structure. Journal of Asian Architecture and Building Engineering, https://doi.org/10.1080/13467581.2022.2145212
Historic buildings are public symbols, standing as a sacred reminders. Many of them have been recognized as World Heritage Sites. In this study, real-time vibration measuremen...

Numerical Study on Elastic Parameter Identification of Large-Span Steel Truss Structures Based on Strain Test Data

Journal Article
Zhang, Y., Zhang, A., Xu, H., & Zhang, H. (2022)
Numerical Study on Elastic Parameter Identification of Large-Span Steel Truss Structures Based on Strain Test Data. Buildings, 12(11), Article 1861. https://doi.org/10.3390/buildings12111861
Large-span steel trusses are widely used in public buildings such as large-span factory buildings, exhibition halls, gymnasiums, and bridges because of their fast construction...
13 results

International Partnership for Multi-dimensional Integration of Circularity in Architectural Education in Turkey and UK

2022 - 2024
This project aims to enhance the newly established partnership with Istanbul Technical University(ITU) and to extern the partnership with the other higher education institutes and organisation in Turk...
Funder: British Council

Augmented Virtual Reality Enhanced Building Information Modelling Technology for Bamboo-Timber Grid-shells

2022 - 2024
This project aims to develop the state-of-the-art building information modelling technology enhanced by augmented virtual reality function for design, manufacturing and building of the bamboo-timber g...
Funder: Construction Industry Council of Hong Kong | Value: £165,570

Computational Fluid Dynamics (CFD) Modelling for the Design of Spill-proof Coffee Cup Lid

2021 - 2022
The project team conducted CFD modelling for the Design of Spill-proof Coffee Cup lid designed and patented by SipSecure Ltd. The results of the numerical simulation will be utilised the product desig...
Funder: Scottish Funding Council | Value: £5,000

Monitoring expansion rate of timber for Jacket Pile Gripper Application

2021 - 2022
Monitoring expansion rate of timber for Jacket Pile Gripper Application
Funder: Scottish Funding Council | Value: £5,000

Investigation of the Hydromorphic behaviours of wood and modified wood for Jacket Pile Gripper applications

2021 - 2022
This Project aims to generate a critical knowledge which will be utilised in this ground-breaking innovation. The successful implementation of this simpler, more economical and environmental friendly ...
Funder: Energy Technology Partnership | Value: £9,936

Adapting to Industry 4.0 oriented international education and research collaboration

2020 - 2025
The project aims to utilise the seed fund from British Council to develop an international research and education network to 1) form a virtual research centre on AI and Robotic for Industry 4.0; 2) co...
Funder: British Council | Value: £70,000

Prestressed Bamboo-Timber Composite - Phase Two

2020 - 2020
The main objectives of this project include: 1) completion of the full-scale pre-stressed Bamboo-Timber Composite Beam prototype with the support of manufacturing expertise and capacity from the indus...
Funder: Royal Academy of Engineering | Value: £21,950

Innovative Engineered Bamboo-Timber Composite Materials

2019 - 2020
The proposed project aims to 1) develop an innovative prestressed Bamboo-timber Sandwich Composite Beam; 2) to improve the I-bone Bamboo-timber Composite Beam with the support of the manufacturing ex...
Funder: Royal Academy of Engineering | Value: £39,070

Bamboo-Timber Composite Materials for Structural Use

2019 - 2019
Based on the successful proof-of-concept pioneering timber structures manufactured in the university lab, the proposed project aims to explore the potentials to 1) develop an innovative prestressed Ba...
Funder: Scottish Funding Council | Value: £4,998

Innovative Glulam timber composites

2015 - 2022
To investigate the timber and glulam thermal and moisture impacts to the composite effects, to study the different possibilities of combining the timber and bamboo materials and propose innovative way...
Funder: ENU Development Trust | Value: £30,000
16 results

Autonomous Wireless Sensor Network System with Energy Harvesting Capability

2022 - date
Martins Odiamenhi | Director of Studies: Dr Chan Hwang See | Second Supervisor: Dr Hongnian Yu

Prestressed Bamboo-Timber Composite structure

2021 - date
Shen Minhe | Director of Studies: Prof Johnson Zhang | Second Supervisor: Dr Ahmed Mohamed

Economic and environmental sustainability evaluation of bamboo-timber composite for construction based on an integrated LCC and LCA approach

2021 - date
Jianbin Yang | Director of Studies: Dr Bernardino D'Amico | Second Supervisor: Prof Francesco Pomponi

The Development of Novel Numerical Tooling for Subsurface Storage of Gas Mixture

2020 - date
Richard Wallace | Director of Studies: Dr Zuansi Cai | Second Supervisor: Dr John McDougall

STATIC AND DYNAMIC RESPONSE OF LATERALLY REINFORCED FLOORS

2020 - date
Abel Munoz Herraez | Director of Studies: Dr Aamir Khokhar | Second Supervisor: Prof Robert Hairstans

Bike share schemes in China

2018 - date
Yusong Zhang | Director of Studies: Prof Achille Fonzone | Second Supervisor: Dr Jonathan Cowie

A feasibility study for the development of sustainable theoretical framework for smart water-energy bathroom unit

2018 - 2022
Toyosi Oye | Director of Studies: Dr Keng Goh | Second Supervisor: Prof Naren Gupta

A feasibility study for the development of sustainable theoretical framework for smart air-conditioning

2018 - 2022
Tosin Oye | Director of Studies: Dr Keng Goh | Second Supervisor: Prof Naren Gupta

Transportation engineering - green port strategies in China

2017 - 2019
Ke Du | Director of Studies: Dr Jonathan Cowie | Second Supervisor: Dr Jason Monios

Experimental study on the torsional mechanics of laminated structural glass beams

2017 - 2022
Mr Kal Uheida | Director of Studies: Prof Johnson Zhang | Second Supervisor: Dr Keng Goh

Date


Date