72 results

The use of artificial compressibility to improve partitioned semi-implicit FSI coupling within the classical Chorin–Témam projection framework

Journal Article
He, T., Wang, T., & Zhang, H. (2018)
The use of artificial compressibility to improve partitioned semi-implicit FSI coupling within the classical Chorin–Témam projection framework. Computers and Fluids, 166, 64-77. https://doi.org/10.1016/j.compfluid.2018.01.022
Over the last decade the classical Chorin–Témam projection method has been utilized to address fluid- structure interaction in a semi-implicit manner. In previous studies the ...

Space-Time Finite Element Dynamic Analysis of Transfer Plate Structures in Tall Buildings

Conference Proceeding
Kuang, J., & Zhang, H. (2009)
Space-Time Finite Element Dynamic Analysis of Transfer Plate Structures in Tall Buildings. In B. H. V. Topping, L. F. Costa Neves, & R. C. Barros (Eds.), Proceedings of the 12th international conference on Civil, Structural and Environmental Engineering Computingdoi:10.4203/ccp.91.223
A new space-time finite element formulation for dynamic analysis of transfer plates is presented. The method is based on an unconventional Hamilton variational principle and a...

Utility-scale Subsurface Hydrogen Storage: UK Perspectives and Technology

Journal Article
Wallace, R. L., Cai, Z., Zhang, H., Zhang, K., & Guo, C. (2021)
Utility-scale Subsurface Hydrogen Storage: UK Perspectives and Technology. International Journal of Hydrogen Energy, 46(49), 25137-25159. https://doi.org/10.1016/j.ijhydene.2021.05.034
To reduce effects from anthropogenically induced climate change renewable energy systems are being implemented at an accelerated rate, the UKs wind capacity alone is set to mo...

Effect of Concentrated Butt-Joints on Flexural Properties of Laminated Bamboo-Timber Flitch Beams

Journal Article
Zhang, H., Gharavi, N., Wong, S. H. F., Deng, Y., Bahadori-Jahromi, A., Limkatanyu, S., …Kuang, J. (2022)
Effect of Concentrated Butt-Joints on Flexural Properties of Laminated Bamboo-Timber Flitch Beams. Journal of Sandwich Structures and Materials, 24(2), 1226-1244. https://doi.org/10.1177/10996362211040103
This paper presents the experimental and analytical studies to investigate the effect of concentrated butt-joints on the flexural properties of laminated bamboo-timber flitch ...

Eight-node membrane element with drilling degrees of freedom for analysis of in-plane stiffness of thick floor plates

Journal Article
Zhang, H., & Kuang, J. S. (2008)
Eight-node membrane element with drilling degrees of freedom for analysis of in-plane stiffness of thick floor plates. International Journal for Numerical Methods in Engineering, 76(13), 2117-2136. https://doi.org/10.1002/nme.2395
The development of eight-node arbitrary quadrilateral membrane elements with drilling degrees of freedom is presented using the compatible displacement interpolation within th...

Analysis of Stiffened Plates: An Effective Semi-Analytical Method

Conference Proceeding
Kuang, J., & Zhang, H. (2003)
Analysis of Stiffened Plates: An Effective Semi-Analytical Method. In B. Topping (Ed.), Proceedings of the Ninth International Conference on Civil and Structural Engineering Computing
During the past three decades, a large amount of research results on the analysis and design of stiffened plates has been reported. Most of the methods used in the analyses in...

Evaluation of the End Effect Impact on the Torsion Test for Determining the Shear Modulus of a Timber Beam through a Photogrammetry Approach

Journal Article
Gharavi, N., Zhang, H., & Xie, Y. (2017)
Evaluation of the End Effect Impact on the Torsion Test for Determining the Shear Modulus of a Timber Beam through a Photogrammetry Approach. Proceedings of the World Academy of Science, Engineering and Technology, 11(3), 666-669
The timber beam end effect in the torsion test is evaluated using binocular stereo vision system. It is recommended by BS EN 408:2010+A1:2012 to exclude a distance of two to t...

The Effect of Occupants’ Behaviour on the Building Performance Gap: UK Residential Case Studies

Journal Article
Bahadori-Jahromi, A., Salem, R., Mylona, A., Hasan, A. U., & Zhang, H. (2022)
The Effect of Occupants’ Behaviour on the Building Performance Gap: UK Residential Case Studies. Sustainability, 14(3), Article 1362. https://doi.org/10.3390/su14031362
Studies have shown that the assumptions used to create dynamic thermal models of buildings do not reflect their actual energy use. Bridging the energy performance gap is vital...

A three-stage criterion method for extracting local vibration modes of tensioned cables in beam string structures

Journal Article
Zhang, T., Zhang, Y., & Zhang, H. (2022)
A three-stage criterion method for extracting local vibration modes of tensioned cables in beam string structures. Frontiers in Materials, 9, Article 1055635. https://doi.org/10.3389/fmats.2022.1055635
As a light and efficient large-span space structure, beam string structures have been widely used since the 1980s. Among them, cables are the main force-bearing components, th...

Real-Time Vibration Measurement and Inverse Analysis for Dynamic Properties of an Axisymmetric Masonry Structure

Journal Article
Buachart, C., Hansapinyo, C., Tantisukumal, N., Miyamoto, M., Matsushima, M., Imjai, T., & Zhang, H. (in press)
Real-Time Vibration Measurement and Inverse Analysis for Dynamic Properties of an Axisymmetric Masonry Structure. Journal of Asian Architecture and Building Engineering, https://doi.org/10.1080/13467581.2022.2145212
Historic buildings are public symbols, standing as a sacred reminders. Many of them have been recognized as World Heritage Sites. In this study, real-time vibration measuremen...
11 results

Augmented Virtual Reality Enhanced Building Information Modelling Technology for Bamboo-Timber Grid-shells

2022 - 2024
This project aims to develop the state-of-the-art building information modelling technology enhanced by augmented virtual reality function for design, manufacturing and building of the bamboo-timber g...
Funder: Construction Industry Council of Hong Kong | Value: £165,570

Prestressed Bamboo-Timber Composite - Phase Two

2020 - 2020
The main objectives of this project include: 1) completion of the full-scale pre-stressed Bamboo-Timber Composite Beam prototype with the support of manufacturing expertise and capacity from the indus...
Funder: Royal Academy of Engineering | Value: £21,950

Computational Fluid Dynamics (CFD) Modelling for the Design of Spill-proof Coffee Cup Lid

2021 - 2022
The project team conducted CFD modelling for the Design of Spill-proof Coffee Cup lid designed and patented by SipSecure Ltd. The results of the numerical simulation will be utilised the product desig...
Funder: Scottish Funding Council | Value: £5,000

Bamboo-Timber Composite Materials for Structural Use

2019 - 2019
Based on the successful proof-of-concept pioneering timber structures manufactured in the university lab, the proposed project aims to explore the potentials to 1) develop an innovative prestressed Ba...
Funder: Scottish Funding Council | Value: £4,998

International Partnership for Multi-dimensional Integration of Circularity in Architectural Education in Turkey and UK

2022 - 2024
This project aims to enhance the newly established partnership with Istanbul Technical University(ITU) and to extern the partnership with the other higher education institutes and organisation in Turk...
Funder: British Council

Innovative Engineered Bamboo-Timber Composite Materials

2019 - 2020
The proposed project aims to 1) develop an innovative prestressed Bamboo-timber Sandwich Composite Beam; 2) to improve the I-bone Bamboo-timber Composite Beam with the support of the manufacturing ex...
Funder: Royal Academy of Engineering | Value: £39,070

Monitoring expansion rate of timber for Jacket Pile Gripper Application

2021 - 2022
Monitoring expansion rate of timber for Jacket Pile Gripper Application
Funder: Scottish Funding Council | Value: £5,000

KTP Action Scaffolding (KTP007069)

2008 - 2011
To embed engineering expertise in the company to support the specification of safe scaffolding structures for complex applications through the development of CAD software.
Funder: Innovate UK | Value: £124,422

KTP Diageo Plc (KTP006209)

2007 - 2011
To optimise the design of the traditional whisky cask to improve maturation performance and reduce whisky loss; to develop a novel cask that is less costly to manufacture.
Funder: Innovate UK | Value: £213,688

Investigation of the Hydromorphic behaviours of wood and modified wood for Jacket Pile Gripper applications

2021 - 2022
This Project aims to generate a critical knowledge which will be utilised in this ground-breaking innovation. The successful implementation of this simpler, more economical and environmental friendly ...
Funder: Energy Technology Partnership | Value: £9,936